Cepharanthine Dry Powder Inhaler for the Treatment of Acute Lung Injury.

Severe acute respiratory syndrome Coronavirus 2 (SARS-CoV-2) induces a severe cytokine storm that may cause acute lung injury/acute respiratory distress syndrome (ALI/ARDS) with high clinical morbidity and mortality in infected individuals. Cepharanthine (CEP) is a bisbenzylisoquinoline alkaloid isolated and extracted from Stephania cepharantha Hayata. It exhibits various pharmacological effects, including antioxidant, anti-inflammatory, immunomodulatory, anti-tumor, and antiviral activities. The low oral bioavailability of CEP can be attributed to its poor water solubility. In this study, we utilized the freeze-drying method to prepare dry powder inhalers (DPI) for the treatment of acute lung injury (ALI) in rats via pulmonary administration. According to the powder properties study, the aerodynamic median diameter (Da) of the DPIs was 3.2 µm, and the in vitro lung deposition rate was 30.26; thus, meeting the Chinese Pharmacopoeia standard for pulmonary inhalation administration. We established an ALI rat model by intratracheal injection of hydrochloric acid (1.2 mL/kg, pH = 1.25). At 1 h after the model's establishment, CEP dry powder inhalers (CEP DPIs) (30 mg/kg) were sprayed into the lungs of rats with ALI via the trachea. Compared with the model group, the treatment group exhibited a reduced pulmonary edema and hemorrhage, and significantly reduced content of inflammatory factors (TNF-α, IL-6 and total protein) in their lungs (p < 0.01), indicating that the main mechanism of CEP underlying the treatment of ALI is anti-inflammation. Overall, the dry powder inhaler can deliver the drug directly to the site of the disease, increasing the intrapulmonary utilization of CEP and improving its efficacy, making it a promising inhalable formulation for the treatment of ALI.

Synthesis of the first remdesivir cocrystal: design, characterization, and therapeutic potential for pulmonary delivery.

While cocrystal engineering is an emerging formulation strategy to overcome drug delivery challenges, its therapeutic potential in non-oral applications remains not thoroughly explored. We herein report for the first time the successful synthesis of a cocrystal for remdesivir (RDV), an antiviral drug with broad-spectrum activities against RNA viruses. The RDV cocrystal was prepared with salicylic acid (SA) via combined liquid-assisted grinding (LAG) and thermal annealing. Formation of RDV-SA was found to be a thermally activated process, where annealing at high temperature after grinding was a prerequisite to facilitate the cocrystal growth from an amorphous intermediate, rendering it elusive under ambient preparing conditions. Through powder X-ray analysis with Rietveld refinement, the three-dimensional molecular structure of RDV-SA was resolved. The thermally annealed RDV-SA produced by LAG crystalized in a non-centrosymmetric monoclinic space group P21 with a unit cell volume of 1826.53(17) Å3, accommodating one pair of RDV and SA molecules in the asymmetric unit. The cocrystal formation was also characterized by differential scanning calorimetry, solid-state nuclear magnetic resonance, and Fourier-transform infrared spectroscopy. RDV-SA was further developed as inhaled dry powders by spray drying for potential COVID-19 therapy. The optimized RDV-SA dry powders exhibited a mass median aerodynamic diameter of 4.33 ± 0.2 µm and fine particle fraction of 41.39 ± 4.25 %, indicating the suitability for pulmonary delivery. Compared with the raw RDV, RDV-SA displayed a 15.43-fold higher fraction of release in simulated lung fluid at 120 min (p = 0.0003). RDV-SA was safe in A549 cells without any in vitro cytotoxicity observed in the RDV concentration from 0.05 to 10 µM.

Neutralisation of SARS-CoV-2 by monoclonal antibody through dual targeting powder formulation.

Neutralising monoclonal antibody (mAb) is an important weapon in our arsenal for combating respiratory viral infections. However, the effectiveness of neutralising mAb has been impeded by the rapid emergence of mutant variants. Early administration of broad-spectrum mAb with improved delivery efficiency can potentially enhance efficacy and patient outcomes. WKS13 is a humanised mAb which was previously demonstrated to exhibit broad-spectrum activity against SARS-CoV-2 variants. In this study, a dual targeting formulation strategy was designed to deliver WKS13 to both the nasal cavity and lower airways, the two critical sites of infection caused by SARS-CoV-2. Dry powders of WKS13 were first prepared by spray drying, with cyclodextrin used as stabiliser excipient. Two-fluid nozzle (TFN) was used to produce particles below 5 µm for lung deposition (C-TFN formulation) and ultrasonic nozzle (USN) was used to produce particles above 10 µm for nasal deposition (C-USN formulation). Gel electrophoresis and size exclusion chromatography studies showed that the structural integrity of mAb was successfully preserved with no sign of aggregation after spray drying. To achieve dual targeting property, C-TFN and C-USN were mixed at various ratios. The aerosolisation property of the mixed formulations dispersed from a nasal powder device was examined using a Next Generation Impactor (NGI) coupled with a glass expansion chamber. When the ratio of C-TFN in the mixed formulation increased, the fraction of particles deposited in the lung increased proportionally while the fraction of particles deposited in the nasal cavity decreased correspondingly. A customisable aerosol deposition profile could therefore be achieved by manipulating the mixing ratio between C-TFN and C-USN. Dual administration of C-TFN and C-USN powders to the lung and nasal cavity of hamsters, respectively, was effective in offering prophylactic protection against SARS-CoV-2 Delta variant. Viral loads in both the lung tissues and nasal wash were significantly reduced, and the efficacy was comparable to systemic administration of unformulated WKS13. Overall, dual targeting powder formulation of neutralising mAb is a promising approach for prophylaxis of respiratory viral infections. The ease and non-invasive administration of dual targeting nasal powder may facilitate the widespread distribution of neutralising mAb during the early stage of unpredictable outbreaks.

Inhalable Nanoparticle-based Dry Powder Formulations for Respiratory Diseases: Challenges and Strategies for Translational Research.

The emergence of novel respiratory infections (e.g., COVID-19) and expeditious development of nanoparticle-based COVID-19 vaccines have recently reignited considerable interest in designing inhalable nanoparticle-based drug delivery systems as next-generation respiratory therapeutics. Among various available devices in aerosol delivery, dry powder inhalers (DPIs) are preferable for delivery of nanoparticles due to their simplicity of use, high portability, and superior long-term stability. Despite research efforts devoted to developing inhaled nanoparticle-based DPI formulations, no such formulations have been approved to date, implying a research gap between bench and bedside. This review aims to address this gap by highlighting important yet often overlooked issues during pre-clinical development. We start with an overview and update on formulation and particle engineering strategies for fabricating inhalable nanoparticle-based dry powder formulations. An important but neglected aspect in in vitro characterization methodologies for linking the powder performance with their bio-fate is then discussed. Finally, the major challenges and strategies in their clinical translation are highlighted. We anticipate that focused research onto the existing knowledge gaps presented in this review would accelerate clinical applications of inhalable nanoparticle-based dry powders from a far-fetched fantasy to a reality.

Protein Aggregates in Inhaled Biologics: Challenges and Considerations.

Pulmonary delivery is the main route of administration for treatment of local lung diseases. Recently, the interest in delivery of proteins through the pulmonary route for treatment of lung diseases has significantly increased, especially after Covid-19 pandemic. The development of an inhalable protein combines the challenges of inhaled as well as biologic products since protein stability may be compromised during manufacture or delivery. For instance, spray drying is the most common technology for manufacture of inhalable biological particles, however, it imposes shear and thermal stresses which may cause protein unfolding and aggregation post drying. Therefore, protein aggregation should be evaluated for inhaled biologics as it could impact the safety and/or efficacy of the product. While there is extensive knowledge and regulatory guidance on acceptable limits of particles, which inherently include insoluble protein aggregates, in injectable proteins, there is no comparable knowledge for inhaled ones. Moreover, the poor correlation between in vitro setup for analytical testing and the in vivo lung environment limits the predictability of protein aggregation post inhalation. Thus, the purpose of this article is to highlight the major challenges facing the development of inhaled proteins compared to parenteral ones, and to share future thoughts to resolve them.

Dry Powder Inhaler with the technical and practical obstacles, and forthcoming platform strategies.

A Dry Powder Inhaler (DPI) is a technique as well as a device used to inhale formulation which is in the form of dry powder, and is inhaled through the nose or mouth. It was developed for the purpose of treating conditions like chronic obstructive pulmonary disease (COPD), Asthma, and even cystic fibrosis etc. The aim of the review is to discuss the different methods of preparation of dry powders along with the characterization of DPI. Here we present the outline of different methods like supercritical fluid extraction (SCF), spray drying, and milling. The review focussed on various devices including single and multi-dose devices used in the DPI. It also highlights on recent advances in the DPI including nano particulate system, siRNA-based medication, liposomes, and pro-liposomes based delivery. In COVID-19 silver nanoparticles-based DPIs provide very prominent results in the infected lungs. Moreover, this review states that the AI-based DPI development provides and improvement in the bioavailability and effectiveness of the drug along with the role of artificial neural networks (ANN). The study also showed that nasally administered drugs (nose to brain) can easily cross the blood-brain barrier (BBB) and enter the central nervous system (CNS) through the olfactory and trigeminal pathway which provides effective CNS concentrations at lower dosage. It is suggested that DPIs not only target respiratory complications but also treat CNS complications too. This review provides support and guides the researcher in the recent development and evaluation of DPI.

Tolerability and pharmacokinetic evaluation of inhaled dry powder hydroxychloroquine in healthy volunteers.

RATIONALE: Inhaled antimicrobials enable high local concentrations where needed and, compared to orally administration, greatly reduce the potential for systemic side effects. In SARS-CoV-2 infections, hydroxychloroquine sulphate (HCQ) administered as dry powder via inhalation could be safer than oral HCQ allowing higher and therefore more effective pulmonary concentrations without dose limiting toxic effects. OBJECTIVES: To assess the local tolerability, safety and pharmacokinetic parameters of HCQ inhalations in single ascending doses of 5, 10 and 20 mg using the Cyclops dry powder inhaler. METHODS: Twelve healthy volunteers were included in the study. Local tolerability and safety were assessed by pulmonary function tests, electrocardiogram and recording adverse events. To estimate systemic exposure, serum samples were collected before and 0.5, 2 and 3.5 h after inhalation. RESULTS AND DISCUSSION: Dry powder HCQ inhalations were well tolerated by the participants, except for transient bitter taste in all participants and minor coughing irritation. There was no significant change in QTc-interval or drop in FEV1 post inhalation. The serum HCQ concentration remained below 10 µg/L in all samples. CONCLUSION: Single doses of inhaled dry powder HCQ up to 20 mg are safe and well tolerated. Our data support that further studies with inhaled HCQ dry powder to evaluate pulmonary pharmacokinetics and efficacy are warranted.

Preparation and Characterization of Inhalable Ivermectin Powders as a Potential COVID-19 Therapy.

Background: Ivermectin has received worldwide attention as a potential COVID-19 treatment after showing antiviral activity against SARS-CoV-2 in vitro. However, the pharmacokinetic limitations associated with oral administration have been postulated as limiting factors to its bioavailability and efficacy. These limitations can be overcome by targeted delivery to the lungs. In this study, inhalable dry powders of ivermectin and lactose crystals were prepared and characterized for the potential treatment of COVID-19. Methods: Ivermectin was co-spray dried with lactose monohydrate crystals and conditioned by storage at two different relative humidity points (43% and 58% RH) for a week. The in vitro dispersion performance of the stored powders was examined using a medium-high resistance Osmohaler connecting to a next-generation impactor at 60 L/min flow rate. The solid-state characteristics including particle size distribution and morphology, crystallinity, and moisture sorption profiles of raw and spray-dried ivermectin samples were assessed by laser diffraction, scanning electron microscopy, Raman spectroscopy, X-ray powder diffraction, thermogravimetric analysis, differential scanning calorimetry, and dynamic vapor sorption. Results: All the freshly spray-dried formulation (T0) and the conditioned samples could achieve the anticipated therapeutic dose with fine particle dose of 300 µg, FPF_recovered of 70%, and FPF_emitted of 83%. In addition, the formulations showed a similar volume median diameter of 4.3 µm and span of 1.9. The spray-dried formulations were stable even after conditioning and exposing to different RH points as ivermectin remained amorphous with predominantly crystalline lactose. Conclusion: An inhalable and stable dry powder of ivermectin and lactose crystals was successfully formulated. This powder inhaler ivermectin candidate therapy appears to be able to deliver doses that could be safe and effective to treat the SARS-COV-2 infection. Further development of this therapy is warranted.

Recent developments in lactose blend formulations for carrier-based dry powder inhalation.

Lactose is the most commonly used excipient in carrier-based dry powder inhalation (DPI) formulations. Numerous inhalation therapies have been developed using lactose as a carrier material. Several theories have described the role of carriers in DPI formulations. Although these theories are valuable, each DPI formulation is unique and are not described by any single theory. For each new formulation, a specific development trajectory is required, and the versatility of lactose can be exploited to optimize each formulation. In this review, recent developments in lactose-based DPI formulations are discussed. The effects of varying the material properties of lactose carrier particles, such as particle size, shape, and morphology are reviewed. Owing to the complex interactions between the particles in a formulation, processing adhesive mixtures of lactose with the active ingredient is crucial. Therefore, blending and filling processes for DPI formulations are also reviewed. While the role of ternary agents, such as magnesium stearate, has increased, lactose remains the excipient of choice in carrier-based DPI formulations. Therefore, new developments in lactose-based DPI formulations are crucial in the optimization of inhalable medicine performance.

Local variation in low carbon footprint inhalers in pre-COVID pandemic primary care prescribing guidelines for adult asthma in England and its potential impact.

AIMS: Pressurised metered-dose inhalers (MDIs) have a much higher carbon footprint than dry powder inhalers (DPIs). We aimed to describe variations of inhaler options in local adult asthma prescribing guidance. METHODS: We reviewed local clinical commissioning group (CCG) adult asthma prescribing guidance for primary care in England in 2019 and recorded DPI and MDI inclusion. The relationship to prescribing data from OpenPrescribing.net was examined. RESULTS: In total, 58 unique guidance documents were analysed covering 144 out of 191 CCGs in England. Only 3% of CCG guidelines expressed an overall preference for DPIs, while 12% explicitly preferred MDIs. The inclusion of DPIs first-line was 77% for short-acting ß-agonists, 78% for low-dose inhaled corticosteroid (ICS) inhalers and 90-96% for combination long-acting ß-agonist/ICS inhalers. MDIs were included first-line in 98-100% of these classes. In 26% of CCGs, there was no first-line DPI option for at least 1 asthma management step. Ten percent of CCGs had no DPI included first-line for any of the 5 classes examined. Many CCGs recommended higher carbon footprint options; Ventolin MDI (25.6%), inhalers containing HFA227ea (57.9%) and ICS regimes recommending 2 puffs of a lower dose over 1 puff of higher dose (94.2%). MDIs were prescribed more in CCGs that recommended them. CONCLUSION: Before the COVID pandemic, there was substantial variation between CCGs in adult asthma prescribing guidance regarding higher and lower carbon footprint options. There may still be scope to amend local guidance to improve clinical and environmental outcomes. This study provides a method and baseline for further investigation of this.

Remdesivir powders manufactured by jet milling for potential pulmonary treatment of COVID-19.

Remdesivir is one of the effective drugs proposed for the treatment of coronavirus disease 2019 (COVID-19). However, the study on inhalable regimen is currently limited though COVID-19 is respiratory diseases and infects lung area. This work aims to prepare inhalable remdesivir formulations and verify their effectiveness through in vitro evaluations. Formulations containing different ratios of jet-milled inhalable remdesivir (5, 10, 20,40, and 70%) with excipients were produced and characterized in terms of the particle size distribution, particle morphology, flowability, water content, crystallinity, the water sorption and desorption capabilities, and the aerodynamic performance. Results indicating that drug loading are a vital factor in facilitating the dispersion of remdesivir dry powder, and the ternary excipient plays a negligible role in improving aerosol performance. Besides, the 70% remdesivir with lactose carrier (70% RD-Lac) was physically stable and retain high aerosol performance after conditioned at 40 °C and 75% RH for a month. Therefore, formulation 70% RD-Lac might be recommended as a candidate product for the potential treatment of COVID-19.

Prospective Evaluation of Exacerbations Associated with Suboptimal Peak Inspiratory Flow Among Stable Outpatients with COPD.

Purpose: A suboptimal peak inspiratory flow (PIF) against a dry powder inhaler (DPI) may result in ineffective inhalation of medications, which may affect outcomes. The primary objective of this study was to examine the association between PIF status and COPD exacerbations among outpatients with moderate to very severe COPD. Patients and Methods: This was a prospective, observational study of patients from 7 US outpatient centers. PIF was measured using an inspiratory flow meter (In-Check™ DIAL G16) set to medium low resistance. Patients were classified by suboptimal (<60 L/min) or optimal PIF (≥60 L/min). The primary outcome was the proportion of patients with moderate/severe COPD exacerbations collected by medical record review over 12 months. Secondary outcomes were time to first exacerbation and mortality. Results: Of 474 patients screened, 38.8% had suboptimal PIF, and 71 patients with optimal PIF were excluded from the study. The enrolled sample included 184 and 219 patients with suboptimal and optimal PIF, respectively. Suboptimal PIF was associated with shorter stature (66.6±4.1 vs 67.8±3.8 inches, P = 0.002), female sex (45.1 vs 34.7%, P = 0.033), Black race (27.2 vs 11.0%, P < 0.001), and greater symptom burden (CAT: 22.3±7.7 vs 19.0±7.0, P < 0.001; mMRC: 2.0±1.1 vs 1.7±1.1, P = 0.003). The proportion of patients with COPD exacerbations at 12 months was not significantly different (29.3 vs 27.9%, P = 0.751). Suboptimal PIF was associated with shorter time to first COPD exacerbation (3.8±2.7 vs 4.9±3.0 months, P = 0.048). The mortality rate at 12 months was higher in the suboptimal cohort but not significantly different (6.5 vs 2.8%, P = 0.073). Conclusion: Over one-third of outpatients with stable moderate to very severe COPD had a suboptimal PIF against a medium low resistance DPI. The phenotype of suboptimal PIF was short stature, female, and Black. Suboptimal PIF status was associated with shorter time to moderate/severe COPD exacerbations compared with optimal PIF.

Dual targeting powder formulation of antiviral agent for customizable nasal and lung deposition profile through single intranasal administration.

Unpredictable outbreaks due to respiratory viral infections emphasize the need for new drug delivery strategies to the entire respiratory tract. As viral attack is not limited to a specific anatomic region, antiviral therapy that targets both the upper and lower respiratory tract would be most effective. This study aimed to formulate tamibarotene, a retinoid derivative previously reported to display broad-spectrum antiviral activity against influenza and severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), as a novel dual particle size powder formulation that targets both the nasal cavity and the lung by a single route of intranasal administration. Spray freeze drying (SFD) and spray drying (SD) techniques were employed to prepare tamibarotene powder formulations, and cyclodextrin was used as the sole excipient to enhance drug solubility. With the employment of appropriate atomizing nozzles, particles of size above 10 µm and below 5 µm could be produced for nasal and lung deposition, respectively. The aerosol performance of the powder was evaluated using Next Generation Impactor (NGI) coupled with a glass expansion chamber and the powder was dispersed with a nasal powder device. By blending powder of two different particle sizes, a single powder formulation with dual aerosol deposition characteristic in both the nasal and pulmonary regions was produced. The aerosol deposition fractions in the nasal cavity and pulmonary region could be modulated by varying the powder mixing ratio. All dry powder formulations exhibited spherical structures, amorphous characteristics and improved dissolution profile as compared to the unformulated tamibarotene. Overall, a novel dual targeting powder formulation of tamibarotene exhibiting customizable aerosol deposition profile was developed. This exceptional formulation strategy can be adopted to deliver other antimicrobial agents to the upper and lower airways for the prevention and treatment of human respiratory infections.

Pharmacokinetics and safety of inhaled ivermectin in mice as a potential COVID-19 treatment.

Pharmacokinetic limitations associated with oral ivermectin may limit its success as a potential COVID-19 treatment based on in vitro experiments which demonstrate antiviral efficacy against SARS-CoV-2 at high concentrations. Targeted delivery to the lungs is a practical way to overcome these limitations and ensure the presence of a therapeutic concentration of the drug in a clinically critical site of viral pathology. In this study, the pharmacokinetics (PK) and safety of inhaled dry powders of ivermectin with lactose were investigated in healthy mice. Female BALB/c mice received ivermectin formulation by intratracheal administration at high (3.15 mg/kg) or low doses (2.04 mg/kg). Plasma, bronchoalveolar lavage fluid (BALF), lung, kidney, liver, and spleen were collected at predetermined time points up to 48 h and analyzed for PK. Histological evaluation of lungs was used to examine the safety of the formulation. Inhalation delivery of ivermectin formulation showed improved pharmacokinetic performance as it avoided protein binding encountered in systemic delivery and maintained a high exposure above the in vitro antiviral concentration in the respiratory tract for at least 24 h. The local toxicity was mild with less than 20% of the lung showing histological damage at 24 h, which resolved to 10% by 48 h.

The future of dry powder inhaled therapy: Promising or discouraging for systemic disorders?

Dry powder inhalation therapy has been shown to be an effective method for treating respiratory diseases like asthma, Chronic Obstructive Pulmonary Diseases and Cystic Fibrosis. It has also been widely accepted and used in clinical practices. Such success has led to great interest in inhaled therapy on treating systemic diseases in the past two decades. The current coronavirus (COVID-19) pandemic also has increased such interest and is triggering more potential applications of dry powder inhalation therapy in vaccines and antivirus drugs. Would the inhaled dry powder therapy on systemic disorders be as encouraging as expected? This paper reviews the marketed and in-development dry powder inhaler (DPI) products on the treatment of systemic diseases, their status in clinical trials, as well as the potential for COVID-19 treatment. The advancements and unmet problems on DPI systems are also summarized. With countless attempts behind and more challenges ahead, it is believed that the dry powder inhaled therapy for the treatment of systemic disorders still holds great potential and promise.

Inhaled Edoxaban dry powder inhaler formulations: Development, characterization and their effects on the coagulopathy associated with COVID-19 infection.

Herein, we demonstrated the development and characterization of a dry powder inhaler (DPI) formulation of edoxaban (EDX); and investigated the in-vitro anticoagulation effect for the management of pulmonary or cerebral coagulopathy associated with COVID-19 infection. The formulations were prepared by mixing the inhalable micronized drug with a large carrier lactose and dispersibility enhancers, leucine, and magnesium stearate. The drug-excipient interaction was studied using X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) methods. The drug and excipients showed no physical inter particulate interaction. The in-vitro drug aerosolization from the developed formulation was determined by a Twin Stage Impinger (TSI) at a flow rate of 60 ± 5 L /min. The amount of drug deposition was quantified by an established HPLC-UV method. The fine particle fraction (FPF) of EDX API from drug alone formulation was 7%, whereas the formulations with excipients increased dramatically to almost 7-folds up to 47%. The developed DPI formulation of EDX showed a promising in-vitro anticoagulation effect at a very low concentration. This novel DPI formulation of EDX could be a potential and effective inhalation therapy for managing pulmonary venous thromboembolism (VTE) associated with COVID-19 infection. Further studies are warranted to investigate the toxicity and clinical application of the inhaled EDX DPI formulation.

Inhaled antibodies: Quality and performance considerations.

The use of antibodies in the treatment of lung diseases is of increasing interest especially as the search for COVID-19 therapies has unfolded. Historically, the use of antibody therapy was based on multiple targets including receptors involved in local hyper-reactivity in asthma, viruses and micro-organisms involved in a variety of pulmonary infectious disease. Generally, protein therapeutics pose challenges with respect to formulation and delivery to retain activity and assure therapy. The specificity of antibodies amplifies the need for attention to molecular integrity not only in formulation but also during aerosol delivery for pulmonary administration. Drug product development can be viewed from considerations of route of administration, dosage form, quality, and performance measures. Nebulizers and dry powder inhalers have been used to deliver protein therapeutics and each has its advantages that should be matched to the needs of the drug and the disease. This review offers insight into quality and performance barriers and the opportunities that arise from meeting them effectively.

Niclosamide inhalation powder made by thin-film freezing: Multi-dose tolerability and exposure in rats and pharmacokinetics in hamsters.

In this work, we have developed and tested a dry powder form of niclosamide made by thin-film freezing (TFF) and administered it by inhalation to rats and hamsters to gather data about its toxicology and pharmacokinetics. Niclosamide, a poorly water-soluble drug, is an interesting drug candidate because it was approved over 60 years ago for use as an anthelmintic medication, but recent studies demonstrated its potential as a broad-spectrum antiviral with pharmacological effect against SARS-CoV-2 infection. TFF was used to develop a niclosamide inhalation powder composition that exhibited acceptable aerosol performance with a fine particle fraction (FPF) of 86.0% and a mass median aerodynamic diameter (MMAD) and geometric standard deviation (GSD) of 1.11 µm and 2.84, respectively. This formulation not only proved to be safe after an acute three-day, multi-dose tolerability and exposure study in rats as evidenced by histopathology analysis, and also was able to achieve lung concentrations above the required IC90 levels for at least 24 h after a single administration in a Syrian hamster model. To conclude, we successfully developed a niclosamide dry powder inhalation that overcomes niclosamide's limitation of poor oral bioavailability by targeting the drug directly to the primary site of infection, the lungs.